The dryer vent you'll actually clean.
Two magnetic rings replace the foil-hose-and-clamp fight behind your dryer. Push the machine back — snap — airtight. Pull it out — open.
- Magnets self-align in the gap — no seeing, no reaching, no tools
- Airtight seal restores airflow — one drying cycle, not two
- Can't crush the hose pushing the dryer back
- Fits the standard 4-in duct, gas or electric
60-day clean-it-or-return-it guarantee If your vent isn't cleaned within an hour of the kit arriving, send it back for a full refund.
Drag it apart. It finds its way back.
This is the whole product in one motion: pull the dryer forward and the vent releases in your hand. Push it back and the magnets do the aiming for you.
The reason you haven't cleaned your vent isn't laziness. It's the clamp.
Cleaning a dryer vent means disconnecting it — dragging the machine out and fighting a foil hose and screw-clamp in a gap you can't see into, then doing it all again in reverse. So the job gets done once, badly, and never again.
DryerDock replaces the clamp-and-pray connection with two magnetic rings that find each other in the dark. Push the dryer back: snap, airtight. Pull it out: the rings release in your hand.
The maintenance becomes possible because the access becomes possible.
Ten minutes once. Fifteen minutes a season.
Attach the rings
Ring A on the dryer outlet, Ring B on the wall duct. One screwdriver, ten minutes, one time ever.
Push back — snap
The magnets self-align in the gap and seat with an airtight seal. You'll hear it land.
Snap apart, clean, done
Pull the dryer forward and the coupling releases. Vacuum the hose, brush the duct, push back.
start with clothes dryers — and the leading cause on record is failure to clean.
DryerDock doesn't clean your vent. It removes the reason you don't. When the vent snaps open in seconds, the job that gets skipped for years becomes the easiest chore in the house.
How it compares
| Foil + clamps what you have now |
Original coupling coupling only |
DryerDock complete kit | |
|---|---|---|---|
| Price | ~$12 | $68.90 at Home Depot | $59.95 |
| Includes hose | ✓ (the problem itself) | ✕ buy your own | ✓ complete |
| Tool-free reconnect | ✕ | ✓ | ✓ |
| Self-aligning blind fit | ✕ | ✓ | ✓ |
| Crush-proof positioning | ✕ | ✓ | ✓ |
What owners say
Got a new tumble dryer in the pantry - which has an extraction fan, but that did nothing; first cycle and the room was drenched. Got this, and problem solved. Chuffed it actually works. The room still feels a bit damp, but there’s zero condensation.
This cheap little gadget was worth trying. It was simple to fit & all the bits were included . Unlike other reviewers I was at school the day that condensation was explained so used blood warm water in the reservoir & not icy cold.
This is perfect for the job in hand, easy to fit, looks very neat and works as it should also at a good price. Very happy.
Before you ask
It fits the standard 4-inch exhaust duct used on nearly every residential US dryer, gas or electric. If you're unsure, measure the duct opening behind the machine — 4 inches across.
The full magnet ring seats with strong holding force and an airtight seal. It releases when you pull the dryer forward — not from vibration or airflow.
Yes — gas dryers use the same standard 4-inch exhaust connection, and correct venting matters even more on gas machines.
Yes. It's fully removable and leaves the original duct exactly as it was.
Both magnetic coupling rings, a 4-inch transition hose, worm clamps, mounting screws, and instructions. The Complete Safety Bundle adds a 3-piece vent cleaning brush set.
Free US shipping from a US warehouse. 60-day money-back guarantee.
For most homeowners the honest answer is never — not because they don't care, but because the access made it miserable. Snap the excuse off the back of your dryer.
60-day money-back guarantee
Free US shipping
Ships from our US warehouse
